Analog Telephone Adapter


Analog Telephone Adapter
Yeastar TA Series analog telephone adapters provide 1 or 2 analog interfaces for residential users and small business to convert existing analog equipment to IP-based networks cost effectively. It is ideal for small business to achieve quick and easy connections to existing analog devices within a VoIP network. Use these in conjunction with both Yeastar and non-Yeastar manufactured IP Phone systems to connect fax machines, and analog telephones.
► Convert analog to VoIP
Cost-effectively and Efficiently
► Powered by USB port. Portable
design. Quiet operation.


Feature-rich
A robust feature set that fulfills
your various needs and cuts
communication cost

Easy
Simple and intuitive Web-based
configuration saves you loads
of time

Cost-Effective
Protect investment in existing
analog telephones. Migrate to IP
voice with the easy-to-install ATA

Miniature
Featuring small form factor to
save space. Powered by USB
port of PC and IP-PBX directly.
Models | TA100 | TA200 | ||||
RJ11 FXS Ports | 1 | 2 | ||||
LAN | 1 10/100 Mbps | |||||
Micro USB Port | 1 | |||||
Protocol | SIP (RFC3261) | |||||
Transport | UDP, TCP, TLS, SRTP | |||||
Codec | G.711 (alaw/ulaw), G.729A/B | |||||
Voice Capability | ITU-T G.168 LEC Echo Cancellation, Dynamic Jitter Buffer | |||||
DTMF Mode | RFC2833, SIP Info, In-band | |||||
Fax | T.30, T.38, Pass-through | |||||
QoS | DiffServ, ToS, 802.1 P/Q VLAN tagging | |||||
Network | DHCP, OpenVPN, PPPoE, Static Route, VLAN | |||||
Network Protocol | FTP, TFTP, HTTP, HTTPS, SSH | |||||
Signaling | FXS Loop Start, FXS Kewl Start | |||||
Caller ID | BELL202, ETSI (V23), NTT (V23-Japan), and DTMF-based CID | |||||
Disconnect Methods | Busy Tone, Polarity Reversal | |||||
Power | DC 5V 1A | |||||
Dimensions (L × W × H) (mm) | 85 × 58 × 24 | |||||
Operation Range | 0°C to 40°C, 32°F to 104°F; | |||||
Storage Range | -20°C to 65°C, -4°F to 149°F | |||||
Humidity | 10-90% non-condensing | |||||
Mounting | Desktop | |||||
Compatibility | Interoperable with Asterisk, Lync Server, FreePBX and certified with Elastix. |
- 3-Way Conferece
- Attack Alert
- Auto Provisioning with Yeastar VoIP PBX
- Blind Transfer
- Call Forward (Always, Busy, No Answer)
- Caller ID Display
- Distinctive Ringtones
- Hotline
- MWI (FSK, Polarity Reversal)
- Packet Capture Tool
- System Logs
- Web-Based Management
- API
- Attended Transfer
- Backup and Restore
- Call Detail Records
- Call Waiting
- Direct IP Dialing
- Do Not Disturb
- Firmware Upgrade by HTTP/TFTP
- IP Blacklist
- NAT Traversal
- Speed Dial
- Voice Menu for Basic Configuration
USE CASES
Analog Extensions for IP-PBX
By connecting analog phones and fax machines directly to the FXS ports of TA series gateways, or TA series analog telephony adapters, analog phones are enabled to work as extensions of the IP-PBX. Without additional investment on expensive IP phones, enterprises could access VoIP networks with the cheap analog phones.
Connect Legacy Equipment to IP-PBX
For enterprises that want to evolve their communication infrastructures into a SIP environment, and hotels and enterprises with a large quantity of analog phones. you could integrate legacy equipment to the local IP system with TA. As a result, analog endpoints could utilize IP-PBX functionalities cost-effectively.