1. To check the IP address of the phone, press the menu key, go to Network, then press Select.
2. Type the phone IP address in your browser, click Enter key to access the web page of the IP phone.
3. In the upper-right corner, click Admin Login, then click Advanced to access the advanced administrator page.

   

   • Choose one account to configure. Here we click EXT1 to configure account 1. Configure the account as follows:
4. Choose one account to configure. Here we choose EXT1.
   1. Set the Line Enable to Yes.
      
   2. In the Proxy and Registration section, set the Proxy to the domain of your PBX.
      
   3. In the Subscriber Information section, fill in the extension information.

      

      • Display Name: Set the name you want to appear on other phone’s display when calling other phones.
      • User ID: Fill in the extension number.
      • Password: Fill in the extension’s Registration Password.
      • Use Auth ID: Set to Yes.
      • Auth ID: Fill in the extension’s Registration Name.
   4. In the Dial Plan section, set the Dial Plan to [x*]..
      
5. Click Phone tab, adjust the audio parameters according to the RTP settings on your PBX, and set RTP Packet Size to 0.020.
6. In the bottom of the page, click Submit All Changes.
   The phone will restart. After the phone restarts, check if the extension is registered.

1. Log in the web page of the phone.
   • User: admin
   • Password: admin
2. Click Line and choose a line to configure.
   
   • User Name: Fill in the extension number.
   • Display Name: Set the name you want to appear on other phone’s screen when calling other phones.
   • Authentication Name: Fill in the extension’s Registration Name.
   • Authentication Password: Fill in the extension’s Registration Password.
   • Active: Check
   • SIP Proxy Server Address: Fill in the domain of your PBX.
   • SIP Proxy Server Port: Fill in the SIP port of your PBX.
3. Click Apply.
   If the extension is registered, the Line Status will show “Registered”.

1. Log in the web page of the IP phone.
   
   • Username: admin
   • Default Password: admin
2. Click Account tab, choose one account, and configure the general settings.
   
   • Account Active: Yes
   • Account Name: Set a name for the account, the name will be displayed on the phone LCD.
   • SIP Server: Fill in the domain of your PBX.
   • SIP User ID: Fill in the extension number
   • Authenticate ID: Fill in the extension’s Registration Name.
   • Authenticate Password: Fill in the extension’s Registration Password.
3. Click Save and Apply.
4. Go to Status > Account Status to check the account status.
   If the extension is registered, the SIP Registration shows “Yes”.
   

1. Log in the web page of the phone.
   • Username: admin
   • Password: admin
2. Click Account tab, choose one account to configure.
   
   • Account: Select one account to configure.
   • Account Active: Yes
   • Primary SIP Server: Fill in the domain of your PBX.
   • SIP Transport: Choose the same transport of the PBX. The default SIP transport on the PBX is UDP.
   • Label: Set the name you want to appear on the phone screen.
   • SIP User ID: Fill in the extension number.
   • Authentication ID: Fill in the extension’s Registration Name.
   • Authentication Password: Fill in the extension’s Registration Password.
   • Name: The local phone name showing on the other phone when calling out.
3. Click Save Set.
   If the extension is registered, the page will show “Registered”.

1. Launch MicroSIP, go to Menu > Add Account, configure the account settings.
   
   • Account Name: Set the name that you want to appear on the soft phone screen.
   • SIP Server: Enter the domain of your PBX.
   • User: Enter the extension number.
   • Domain: Enter the domain of your PBX.
   • Password: Enter the extension’s Registration Password.
   • Display Name: Set the name you want to appear on the other phone’s screen when calling out.
   • Transport: Choose the same protocol of the PBX. The default protocol on PBX is UDP.
2. Click Save.

   If the extension is registered, you can see the status shows as below.

   

3. Go to Menu > Settings, enable G729 and iLBC codecs.
   Note: G729 and iLBC are the default enabled codecs on the PBX. To ensure the call is normal, you need to enable the G729 or iLBC codec on the soft phone.
   
4. Click Save.

1. Log in the web page of the phone.
   • Username: admin
   • Password: 22222
2. Go to Advanced section, choose a line to configure.
   1. In the Basic SIP Authentication Settings, enter the extension information.
      
      • Screen Name: Set the name that you want to display on the phone screen.
      • Phone Number: Fill in the extension number.
      • Caller ID: Fill in the extension’s Caller ID.
      • Authentication Name: Fill in the extension’s Registration Name.
      • Password: Fill in the extension’s Registration Password.
   2. In the Basic SIP Network Settings, enter the PBX information.
      
      • Proxy Server: Fill in the domain of your PBX.
      • Proxy Port: Fill in the same SIP port of the PBX. The default SIP port on the PBX is 5060.
      • Registrar Server: Fill in the domain of your PBX.
      • Registrar Port: Fill in the same SIP port of the PBX. The default SIP port on the PBX is 5060.
      • Registration Period: Set the registration period according to the settings on your PBX. The default range of SIP registration time on the PBX is 60-3600 seconds.
3. Click Save Settings.
4. Go to Advanced > Global SIP, set the RTP settings and codec preferences.
   1. In the RTP Settings section, configure the RTP according to the settings on your PBX.
      
      • Force RFC2833 Out-of-Band DTMF: Enabled
      • DTMF Method: RTP
      • RTP Encryption: If you don’t enable SRTP for the extension, choose SRTP Disabled.
   2. In the Codec Preference List section, set the codec preferences according your PBX settings.
      Note: G729 and iLBC are the default enabled codecs on the PBX, you should enable the G729 codec or the iLBC codec on your phone.
      
5. Click Save Settings.
6. Reboot the phone to make the configuration take effect.
   You can check the extension status via Status > System Information. If the extension is registered, the status shows “Registered”.

1. Start up the phone and check its IP address.
   1. Press Menu.
   2. Go to System Settings > Network Settings > IPv4 Settings > Static.
2. Open the web service for the Panasonic phone.
   1. Press Menu.
   2. Go to Basic Settings > Other Option > Embedded Web.
3. Log in the web page of the IP phone.
   • Username: admin
   • Password: adminpass
4. Click VoIP, choose a line to configure.
   1. In the Basic section:
      
      • Phone Number: Fill in the extension number.
      • Registrar Server Address: Fill the domain of your PBX.
      • Registrar Server Port: Fill in the SIP port of your PBX.
      • Proxy Server Address: Fill in the domain of your PBX.
      • Proxy Server Port: Fill in the SIP port of your PBX.
      • Authentication ID: Fill in the extension’s Registration Name.
      • Authentication Password: Fill in the extension’s Registration Password.
   2. In the Advanced section:
      
      • SRV lookup Prefix for UDP: Enter _sip_udp.
      • SRV lookup Prefix for TCP: Enter _sip_tcp.
      • Local SIP Port: The SIP port number for each line must be unique, default value: 5060 (for Line 1) and 5070 (for Line 2).
      • Transport Protocol: Choose the same transport protocol as the PBX.
5. Click Save.
   If the extension is registered, you can see the VoIP status shows “Registered”.

1. To check the IP address of the phone, press Menu on the phone, go to Settings > Status > Network > TCP/IP Parameter.
2. Enable Web service for the phone.
   1. Press Menu on the phone, go to Settings > Advanced, enter the password 456.
   2. Go to Administration Settings > Web Server Configuration, configure the following:
      • Web Server: Enabled
      • Web Config Mode: Choose HTTP or HTTPS
3. Log in the web page of the phone.

   Note: For the firmware version 5.5.0 or later, the phone only supports HTTPS web login. You need use HTTPS to log in the web page. For example, type https://192.168.6.160 in your web browser to access the phone web page.

   

   • Login as: Admin
   • Password: 456
4. Go to Settings > Lines, choose a line to configure.
   1. Enable SIP Protocol.
      
   2. Expand Identification option, and set as the following:
      
      • Display Name: Set the name you want to appear on other phone’s screen when calling other phones.
      • Address: Fill in the extension number.
      • Label: Set the name you want to appear on the phone screen.
   3. Expand Authentication option, and set as the following:
      
      • User Login Credentials: Disable
      • User ID: Fill in the extension’s Registration Name.
      • Password: Fill in the extension’s Registration Password.
   4. Expand SIP Server 1 option, and set as the followings:
      
      • Special Interop: Standard
      • Address: Fill in the domain of your PBX.
      • Port: Fill in the same SIP port as the PBX.
      • Transport: Choose the same transport protocol as the PBX.
      • Register: Yes
5. Go to Settings > SIP, set the Digitmap to blank. In this way, you can dial any number out.
   
6. Click Save.
   If the extension is registered, the Register Status will show “Registered”.

1. To check the IP address of the phone, press Settings > Information > System Info or press Menu > Information > System Info.
2. Log in the web page of the phone, go to Setup > Identify 1 to configure the account 1.
   
   • Identify active: On
   • Displayname: Fill in the name you wish to appear on the phone screen.
   • Account: Fill in the extension number.
   • Password: Fill in the extension’s Registration Password.
   • Registrar: Fill in the domain of your PBX.
   • Authentication Username: Fill in the extension’s Registration Name.
   • Mailbox: Fill in the feature code of Check Voicemail on the PBX. The default code is *2.
3. Click RTP tab, set RTP Encryption to Off if you don’t enable SRTP feature for the extension.
   
4. Click Apply, then click Save in the top-right corner.

1. Launch X-Lite, go to Softphone > Account Settings, configure the SIP account.
   
   • Account name: Set a name for the account.
   • User ID: Enter the extension number.
   • Domain: Enter the domain of your PBX.
   • Password: Enter the extension’s Registration Password.
   • Display name: Set the name that you want to appear on the soft phone screen.
   • Authorization name: Enter the extension’s Registration Name.
2. Click OK.

   If the extension is registered, you can see the status shows as below.

   

    

Yealink

This guide is applicable to all the Yealink phones and Yeastar Cloud PBX v81.8.0.7.

Zoiper Soft Phone

This guide is based on the Zoiper PC client v5.2.12 and Yeastar Cloud PBX v81.8.0.7.